Google Alert - cannabidiol for epilepsy

cannabidiol for epilepsy
Daily update July 31, 2020
In 2018, the US food and drug administration approved the first CBD drug for epilepsy, prompting an even greater rush to bring various CBD products ...
Facebook Twitter Flag as irrelevant
See more results | Edit this alert
You have received this email because you have subscribed to Google Alerts.
RSS Receive this alert as RSS feed
Send Feedback

SAIMM: Journal Volume 120, No. 05, May 2020


SAIMM: Journal Volume 120, No. 05, May 2020 


Assessment of the ergonomic design of self-contained self-rescuer (SCSR) devices for use by women in mining
By J.J. Pelders and J.H. de Ridder

The aim of this project was to assess the ergonomic design of self-contained self- rescuer devices (SCSRs) for use by women in the South African Mining Industry. Dimensional limitations or shortcomings of current SCSRs. The study findings can be used to inform interventions to improve the design and fit of SCSRs.


Removal of arsenic from water using copper slag
By T. TΓΌrk,  . Alp, R. Sezer, and C. Arslan

The potential use of copper slag (CS) as adsorption material in the removal of arsenic contaminant from water were exaamined. The adsorption kinetics indicated that the second-order kinetic model best described the adsorption process. Based on the results, copper slag was shown to be a suitable adsorbent for removal of arsenic from water, with capacity to reduce arsenic levels to <10 Β΅g/L arsenic, below the limit set for water by World Health Organization.
Preliminary investigation into the extraction of light rare earth elements from different resources using the sulphation roasting process
By K.C. Maluleke, X.C. Goso, S. Ndlovu, E. Matinde, and S. McCullough

Co-extraction of gangue elements with rare earth elements (REEs) is undesirable as it complicates downstream separation and purification processes. Preliminary tests were conducted on synthetic cerium oxide (chemical grade CeO2) to investigate the technical feasibility of the sulphation roasting process for the extraction of REEs from different resources. The preliminary results indicate that it may be feasible to produce REEs from different resources using the established selective sulphation roasting process.
In-truck ore grade estimation using apparent density measurements
By J. Giroux, F-A. Consuegra, M. Fillion, G. Fortin, D. Horth, and D. Michaud

The Rio Tinto Iron and Titanium (RTIT) Havre St-Pierre (HSP) mine in Canada has implemented a grade detection system based on the determination of the apparent density of the material loaded into mine trucks. This is used to segregate economic ore from waste as part of the re-handling of a historical waste stockpile. The system takes advantage of the strong relationship established between ore density and grade for the HSP mineralization. In the future, this in-truck grade detection technology could be expanded to the entire mine operation and be instrumental in ore vs waste discrimination and production reconciliation.

An investigation into the wear mechanisms of carbon- and silicon carbide-based refractory materials by silicomanganese alloy
By W.K. Banda, J.D. Steenkamp, and E. Matinde

Two carbon-based refractories, a type K and and a type SiC material, were studied to understand the main wear mechanisms when in contact with SiMn alloy and to determine which refractory would be most suitable for application in the hearth area of a SiMn producing furnace. Type K refractory was found to be the most suitable refractory to use.

Thiol collector blends for improved PGM recovery: a case study of a UG2 ore
By M.G. Moja, I.O. Otunniyi, and P. Mendonidis
Different thiol collectors are widely used to improve the flotation performance of PGM- containing ore. The performance of sodium n-propyl xanthate (SNPX),dithiocarbamate (DTC), and O-isopropyl-N-ethyl thionocarbamate (IPETC) collectors was evaluated in order to improve the recovery of PGMs from UG2 ore. The best blend improved the 3PGM + Au recovery from 81% to 86% without compromising the grade. There is room for continued research on the most effective blends.

Purification of crude titanium powder produced by metallothermic reduction by acid leaching
By M.R. Serwale, T. Coetsee, and S. Fazluddin

A process is under development that aims to produce commercially pure (CP) grade 4 titanium metal powder by direct metallothermic reduction of TiCl4. Crude titanium produced by this method is inevitably contaminated. Acid leaching was identified as
a suitable method for purifying the crude reduction mass. Results demonstrated that when the pH of the media and temperature are controlled, the drawbacks associated with acid leaching can be overcome and the process used successfully for downstream purification of the crude product.

For more information regarding the SAIMM Journal please contact:

Kelly Matthee
Journal Co-ordinator
Telephone: +27 11 834 1273  l  Facsimile: 086 585 2901
E-mail: l  Website:

SAIMM: Journal Volume 120, No. 05, May 2020


Dear SAIMM members and subscribers,

Attached, is the May 2020 Journal.
Please note the e-mailed PDF document is highly compressed, in order to make it as small as possible for sending by e-mail.  We urge you to view a higher-quality version that is also available for downloading from the SAIMM website, where full copies of the Journal will be available for downloading at any time using the link below.
For people who like a page-turning electronic copy to read on their tablets, there is a service available at at no cost.
Please send any feedback you wish to provide to Kelly Matthee at


Mzila Mthenjane
SAIMM President 2019-2020

Rosemary Falcon
SAIMM Editorial Consultant

SAIMM Online Conferences: DIMI Women’s Month Online Webinar Series and 3rd School on Manganese Ferroalloy Production 2020

Event Registration Reminders

Login, likeπŸ‘, shareπŸ” and please commentπŸ’¬ on our social media posts.
Engage with us and the world will follow – it all starts with you.